Skip to Main Content

DC Right Angle Gearmotors

The output shaft of right-angle gear motors is at a 90° angle from the motor shaft. Bodine DC right-angle gearmotors feature either worm gearing or hypoid gearing. Worm gearing is a proven and economical solution for applications that require high-speed reductions in limited space, and with very smooth and quiet operation. Worm gears have inherent self-locking ability depending on design and ratio. All Bodine worm-gear gearboxes are permanently lubricated with high- performance lubricant, and feature bronze gears for high shock load capability. The worm gear is hardened and ground for high strength and long life.

Right angle gearmotors with hypoid gear sets have several advantages when compared with standard worm-and-pinion right-angle gearmotors. While slightly more expensive, hypoid gearmotors are more efficient, produce less heat, provide higher torque, and are usually smaller than equivalent gearmotors with worm-and-pinion reducers.

Bodine PMDC right-angle gearmotors feature permanent magnet DC motors. PMDC motors are compact, easy to set up, produce high starting torque, and quick deceleration. Bodine offers three DC motor frame sizes (24A, 33A, and 42A) with both low-voltage (12/24V), “SCR rated” (90V and 180VDC) and standard (130VDC) windings.

Bodine offers seven right-angle gearboxes: type 3F, 3RD, 5F, 5L, 5N, GB and 5H. Most of these gearheads are also available in hollow shaft configuration. All Bodine gearhead-motor combinations are designed to work together as one integral unit, eliminating the chance of leakage or misalignment. These geared motors step down the motor speed (typically 1750 or 2500 rpm) to as low as 0.7 rpm, and as high as 500 rpm. While the amount of output torque they provide is dependent on the gear ratio, the Bodine family of DC right-angle gearmotors deliver torque from 5.2 to 380 lb-in.

Typical applications include medical and laboratory equipment, labeling and packaging machines, conveyors, and a wide range of factory automation solutions. Low voltage models ideal for battery, solar, and off-grid remote applications.

  • Predictable performance
  • Simple speed regulation
  • High starting torque
  • Worm-gear and hypoid models
  • Hollow shaft configuration for most models

 

Search by Specification (Parameter Search)

Torque Units
Speed Units
Power Units

Filter By:

Back

Hypoid Series 33A7 DC Right Angle Hollow Shaft 130V, 24V & 12V Gearmotors

Speed / RPM: 10 to 500

Torque: 20 to 1535 lb-in

Power / HP: 1/3 to 1/5

Hypoid Series 33A7 DC Right Angle Hollow Shaft SCR Rated 90V & 180V Gearmotors

Speed / RPM: 10 to 500

Torque: 20 to 1120 lb-in

Power / HP: 1/4 to 1/5

24A-3F Series DC Right Angle Gearmotor

Speed / RPM: 42 to 500

Torque: 5.2 to 22 lb-in

Power / HP: 1/17

24A-3F/H Series DC Right Angle Hollow Shaft Gearmotor

Speed / RPM: 29/42 to 500

Torque: 5.5 to 37 lb-in

Power / HP: 1/23 to 1/11

Metric 24A-3F Series DC Right Angle Gearmotor

Speed / 1/min: 43 to 172

Torque: 0.6 to 1.8 Nm

Power / Watts: 23.3

24A-3RD Series DC Right Angle Gearmotor

Speed / RPM: 0.7 to 12.5

Torque: 92 to 147 lb-in

Power / HP: 1/29 to 1/17

33A-5F Series DC Right Angle Gearmotor

Speed / RPM: 62 to 500

Torque: 11 to 55 lb-in

Power / HP: 1/8

Metric 33A-5F Series DC Right Angle Gearmotor

Speed / 1/min: 43 to 345

Torque: 1.0 to 5.1 Nm

Power / Watts: 53.26

33A-5R and 33A-5L Series DC Right Angle Gearmotor

Speed / RPM: 50 to 200

Torque: 17 to 77 lb-in

Power / HP: 1/12 to 1/6

33A-GB Series DC Right Angle Gearmotor

Speed / RPM: 6.2 / 8.9 to 29 / 42

Torque: 151 / 200 to 380 / 380 lb-in

Power / HP: 1/8 / 1/4

33A-GB/H Series DC Right Angle Hollow Shaft Gearmotor

Speed / RPM: 6.2 / 8.9 to 29 / 42

Torque: 151 / 200 to 380 / 380 lb-in

Power / HP: 1/8 / 1/4

33A-5L/H Series DC Right Angle Hollow Shaft Gearmotor

Speed / RPM: 43/62 to 345/500

Torque: 17/22 to 84/109 lb-in

Power / HP: 1/8 / 1/4

33A-5L/H Series DC Right Angle Hollow Shaft?SCR Rated 90V & 180V?Gearmotors

Speed / RPM: 33 to 500

Torque: 14 to 89 lb-in

Power / HP: 1/7

42A-5L Series DC Right Angle Gearmotor

Speed / RPM: 33 to 200

Torque: 37 to 117 lb-in

Power / HP: 1/6

42A-5N Series DC Right Angle Gearmotor

Speed / RPM: 25/62 to 360/500

Torque: 24 to 109 lb-in

Power / HP: 3/16 / 7/16 to 3/16 / 1/4

Metric 42A-5N Series DC Right Angle Gearmotor

Speed / 1/min: 43 to 172

Torque: 3.5 to 9.1 Nm

Power / Watts: 124.28

42A-5H Series DC Right Angle Gearmotor

Speed / RPM: 52 to 250

Torque: 52 to 264 lb-in

Power / HP: 1/3 to 1/2

Metric 42A-5H Series DC Right Angle Gearmotor

Speed / 1/min: 36 to 96

Torque: 9.2 to 14.2 Nm

Power / Watts: 149.14

42A-GB Series DC Right Angle Gearmotor

Speed / RPM: 8.9 to 42

Torque: 213 to 380 lb-in

Power / HP: 1/4

Metric 42A-GB Series DC Right Angle Gearmotor

Speed / 1/min: 6.2 to 28.8

Torque: 17.0 to 42.8 Nm

Power / Watts: 124.28

Need help finding the right parts?

We have all the expertise you need to get the job done. Contact us today!

日韩av东京社区男人的天堂_亚洲人成电影网站色迅雷_国产香蕉尹人视频在线